Walton Primo D6 is the latest addition to the Walton Mobile series. This time, the handset comes with 1.2 GHz Quad-Core Processor, Android KitKat 4.4.2 Operating System, 4 inches WVGA screen, 512MB RAM, 4GB ROM, 2 MP camera with LED Flash, 1550 mAh Li-ion Battery, Bluetooth v4 and many more. The Walton Primo D1, D2,D3, D4 & D5 were good, but the newcomer D6 has better specs than those. Here are the full specifications of Walton Primo D6:
How to Flash Walton Primo D6
Step 1: Download and extract the stock firmware on your PC.
Step 2: Next extracting you will find the SP Flash Tool, Driver and teaching manual.
Step 3: Install the USB Drivers, avoid if drivers are already installed.
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the PC using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. Step 7: Green Ring will appear at the end of successful Flash.
How to Flash Walton Primo D6
Step 1: Download and extract the stock firmware on your PC.
Step 2: Next extracting you will find the SP Flash Tool, Driver and teaching manual.
Step 3: Install the USB Drivers, avoid if drivers are already installed.
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the PC using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing. Step 7: Green Ring will appear at the end of successful Flash.
No comments:
Post a Comment